Bobcad lathe threading set

images bobcad lathe threading set

I may be able to do some VB to look to see if its a drill or groove being done and apply the rapids appropriately but starting to look like I should really start dividing the X Tool Home positions by 2 in BobCAD and hope that I always remember to do that. I reported a few things today and also requested more features. The workflow also seems nice and logical and once you get used to it, it is as quick as any Lathe CAM I have used. Another issue I have is the machine setup in BobCAD will not stick to metric mode, I change from inch, click save then next time I go back in it is back to inch. M30 I have metric system. Learn more. I tried a few of the Mach Post Processors and all produced code that would not load in Mach for various reasons but I sorted them in the post processor I made and it produces decent code now. P : P actually consists of multiple values which control the thread behavior, 01 : Number of spring passes or spring cuts. I had thought of a way I may be able to get round it and it does work for all cycles with the exception of the grooving cycle.

  • Windows Drehbank CADCAM Software Engisch V29 , Thojomech smart cnc machines
  • LATHEforSolidWorks BobCAD Europe
  • Just got BOBCAD and here are my initial thoughts.
  • BobCadCam > Lathe Thread issues

  • Q: I need to make an ID (Inside Diameter) thread with BobCAD-CAM on my lathe. For example, if the Thread Pitch were set to, the Threads Per Inch. Lathe CAD-CAM makes it easy to set advanced 2 axis toolpaths for OD and ID roughing, finishing, threading, grooving, boring, drilling, and cut offs.

    Windows Drehbank CADCAM Software Engisch V29 , Thojomech smart cnc machines

    Lathe CAD-CAM makes it easy and fast to set up 2-Axis toolpaths for OD and ID roughing, finishing, threading, grooving, boring, drilling, cut-offs and more.
    Machine VT Recommended for you. Would be a nice and easy fix if that's all it is.

    images bobcad lathe threading set

    My main reason for wanting to assign holders to tools is for internal tools and grooving tools to aid in collision detection, I have not tested the internal holders out yet but I dont see there being a problem with them but we will see.

    I followed the instructions in BobCADs help to try and assign them to specifi tools but no matter what I tried I could not get them working correctly, see first screenshot.

    I had thought of a way I may be able to get round it and it does work for all cycles with the exception of the grooving cycle.

    images bobcad lathe threading set
    LUNA NOIEMBRIE POEZII MIHAI
    That however now brings up an issue as it means I am calling a rapid to X before a rapid to Z for a groove but that may not be suitable for a drill cycle.

    images bobcad lathe threading set

    I knew I could do that but was hoping for a proper fix but it seems that they think it is correct. Andy Phillip Recommended for you.

    Video: Bobcad lathe threading set Threading on a manual lathe BEST TECHNIQUE EVER !!!!

    What's a Tensor? Cancel Unsubscribe.

    Problem with threading on my 7x14 realbull lathe.

    LATHEforSolidWorks BobCAD Europe

    It's best to set your post to output the code for your lathe in canned cycle. I tried one of the Haas ones included with BobCAD and the produced code looked OK to me. › forum › lathe-thread-issues I have a threading program, but the threads are not starting at the end of the part. (TOOL #7) (Lathe Thread) T G97 S M3 G00 X Z.5 M8 face, or even set a longer lead in, normal turning practice to do that.
    Designing a 7-segment hex decoder - Duration: Hello Guest it is November 25,PM.

    Just got BOBCAD and here are my initial thoughts.

    HotSnooker Recommended for you. Draw your custom tool profiles and holders to match non-standard tooling, which is supported in gouge checking and undercutting. This powerful CAM programming software is a complete CNC lathe solution for all of your simple and complex part turning jobs.

    images bobcad lathe threading set

    images bobcad lathe threading set
    Wolf run state park trout stocking texas
    The next video is starting stop.

    Cancel Unsubscribe.

    BobCadCam > Lathe Thread issues

    Sign in to add this to Watch Later. Sign in to add this video to a playlist. Published on May 22, Things that were wrong were I and K round the wrong way, so some arcs produced full circles instead of small arcs.

    Video: Bobcad lathe threading set Thread Cutting on the Lathe, Part Four - Setting up the Lathe and Cutting the Thread